H3218 Center-Guide Detector
CÔNG TY TNHH TỰ ĐỘNG TOÀN CẦU
Địa chỉ: 30 Chu Văn An, P. Hiệp Phú, TP. Thủ Đức, TP. HCM
VPĐD: 30 Đường 128, Phước Long A, P. Thủ Đức, TP.HCM
Hotline: 0909 251 007
Skype: Toan cau automation
Mail: toancauautomation@gmail.com
Website: www.toancauautomation.com
The H3218 Center-Guide Detector is the ideal solution for center-guiding strips in metals applications. Control is maintained during material width changes, with no repositioning of the detector required during product width changes. An automatic calibration routine can be initiated either locally via a pushbutton or remotely through a contact closure, and allows the detector to compensate for varying light levels based on detector-to-light source gap.
H3218 Center-Guide Detector | ||
Metric | ||
Operating Temperature Range |
32 - 122° F
|
0 - 50° C
|
Recommended Gap with Light Source: |
2 - 10 ft
|
0.6 - 3 m
|
Sensor Sizing | Sensor is sized based on minimum and maximum strip widths. | Sensor is sized based on minimum and maximum strip widths. |
Refer to selection chart for specific sensor model numbers. | Refer to selection chart for specific sensor model numbers. | |
Recommended Passline (from light source to material) | 50% of gap | 50% of gap |